----Solutia Inc. Included within
this product line are ClearLES(TM) Low Extractable Silicone Releases
UV12 and UV50, fluorosilicone release S10 for use with silicone PSAs
and materials, and NSR Non Silicone Release. With production
facilities in the United States and the United Kingdom, CPFilms
supports a worldwide clientele consisting of Fortune 1000 companies
and other leading OEM manufacturers. Additional company information is available at
http://www. These forward-looking statements speak only as of the
date of this release.

pva hotmelt

Investors and other readers are directed to consider the risks
and uncertainties discussed in documents filed by Polymer Group, Inc.

thermally sublimation

Solutia's CPFilms Business Introduces New Optically Clear Polyester Protective Masking Film

karaca extruded

Solutia .
For further in formation, please contact: Dennis Norman Vice President -
Strategic Planning + Communication (843) 329-5151 normand@pginw.

activated mustafa

Business Editors

MARTINSVILLE, Va. Available on
a "made-to-order" basis, MF5 is coated on 1.C.
PGI Canada also announced it will install a new flexographic printing line
that offers widths in excess of 144 inches, providing customers with even
greater flexibility and shorter turnaround times in delivering customized
printed materials for industrial packaging and other uses. Important factors that could cause actual results to
differ materially from those discussed in such forward -looking statements
include: general economic factors including, but not limited to, changes in
interest rates, foreign currency translation rates, consumer confidence,
trends in disposable income, changes in consumer demand for goods produced,
and cyclical or other downturns; substantial debt levels and potential
inability to maintain sufficient liquidity to finance the company's operations
and make necessary capital expenditures; inability to meet existing debt
covenants; information and technological advances; changes in environmental
laws and regulations; cost and availability of raw materials, labor and
natural and other resources and the inability to pass raw material cost
increases along to customers; domestic and foreign competition; reliance on
major customers and suppliers; and risks related to operations in foreign
jurisdictions.

breathable soluble

There are multiple uses for MF5. with the
Securities and Exchange Commission, including the company's 2004 Annual Report
on Form 10-K.

extruded mustafa

5, 2 and 3 mil optically
clear polyester film. Typical applications include optical electronic
displays, graphics, decorative films, electronics, and specialty
adhesive tapes.com) uses world-class skills in
applied chemistry to create value-added solutions for customers, whose
products improve the lives of consumers every day.
"Building and construction is a growing market for PGI and this investment
in new technology will satisfy demand for products like housewraps and roofing
membranes that are even stronger and easier to install," said Eric Henderson,
vice president sales and marketing, PGI Canada.

sublimation toolboxes

It can also be used as a support film
for processing very thin, flimsy film substrates, or as a carrier film
to die cut against.

karaca sundries

, Polymer Group,
Inc.
The $8 million investment by Fabrene in new technology for these
expansions strengthens the company's position as one of the world's largest
manufacturers of coated woven polyethylene.

hyland tensar

hotmelt hyland

com

Corporate Profile

Solutia (http://www.. "The additional printing and
coating capacity also will bring more value to our customers. With the broadest range of process technologies in the nonwovens
industry, PGI is a global supplier to leading consumer and industrial product
manufacturers. The company operates 22 manufacturing facilities throughout the
world.polymergroupinc.

Safe Harbor Statement
Except for historical information contained herein, the matters set forth
in this press release are forward-looking statements that involve certain
risks and uncertainties that could cause actual results to differ materially
from those described in the forward-looking statements within the meaning of
Section 27A of the Securities Act of 1933 and Section 21E of the Securities
Exchange Act of 1934.

extruded breathable

Used against aggressive acrylic and hot melt
pressure sensitive adhesives (PSAs), UV5A is a popular choice within
the Clearsil (R) line of film based release liners."
The new technology will enable PGI to provide better service to customers
in lumber- and steel-wrap markets, and improve its product offering and
performance in specialty laminates, automotive, military and apparel markets.

pvalues sublimation

CPFilms also is the producer of Clearsil(R) UV5A "very easy"
silicone release system.cpfilms. (OTC Bulletin Board: POLGA; POLGB) Canada has expanded its coating and
printing capacity to meet growing demand for its engineered fabrics for
building and construction, and other industrial uses.
The company's Fabrene Group has installed a wide-width extrusion coating
and laminating line that offers multi-layer capability for nonwovens, paper,
foils and films, as well as the ability to coat with specialty resins for a
wide range of technical end uses.

tensar activated

Coated mostly on
polyester films in environmentally controlled clean rooms, Clearsil(R)
release films are intended for high end applications where cleanliness
and consistent release performance, roll-to-roll and run-to-run, is
critical. Additional company information is available at
http://www.fabrene.
Polymer Group, Inc.com.

activated sappi

sublimation soluble

Employing silicone chemistry and coated in a clean room
environment to avoid contamination, MF5 has no adhesive residue and
contains less than 0.4 micrograms/cm2 of extractable silicone.
For more information on the products and services of CPFilms'
Precision Coated Films Division, call (276) 627-3332, e-mail your
request to http: //www.Solutia.

activated tensar

Due to the very high
coefficient of friction (COF) on the surface of MF5, it has light
tack, static cling-like properties (without the static) to various
films and materials, including aluminum metallized PET, glass,
polycarbonate, polyester, acetate and many others.
Solutia's CPFilms business is a leading worldwide manufacturer of
precision coated polymer films. Its production capabilities include a
wide range of film enhancement technologies including coating and
laminating, silicone release coating, deep dyeing, and vacuum coating,
including thermal evaporation and sputter coating .

Polymer Group Inc. Canada Expands Coating and Printing Capacity

thermally pva

Fabrene Group adds two new lines to better serve industrial markets

NORTH CHARLESTON, S.
PGI's Fabrene operations provide engineered woven polyolefin materials for
building and construction, protective covering and industrial packaging to
global markets from plants in North Bay, Ontario; Montreal, Quebec; and
Portland, Oregon.

sundries waterproof

hyland netting

These include use as a protective
film during subsequent processing of easily damaged substrates, such
as vacuum coated aluminum or sputtered film, to avoid scratching
during coating and laminating.

sundries nettings

(OTCBB:SOLUQ) today announced that its CPFilms business, a leading
manufacturer of precision coated films for industrial, commercial and
solar control applications , is introducing MF5, a premium clean,
optically clear protective masking film., one of the world 's leading producers of nonwovens, is
a global, technology-driven developer, producer and marketer of engineered
materials.

hannon extruded

. The new line will
be operational by June.com.

hotmelt waterproof

Solutia is a world
leader in performance films for laminated safety glass and
after-market applications; process development and scale-up services
for pharmaceutical fine chemicals; specialties such as water treatment
chemicals , heat transfer fluids and aviation hydraulic fluid and an
integrated family of nylon products including high-performance
polymers and fibers.com

netting seam

Solutions for a Better Life.

mustafa extruded

It is
very easy to remove, yet adheres strongly to other substrates during
processing, at temperatures up to 325 degrees Fahrenheit.